|
A piping and instrumentation diagram/drawing (P&ID) is a diagram in the process industry which shows the piping of the process flow together with the installed equipment and instrumentation. ==Contents and function== A piping and instrumentation diagram/drawing (P&ID) is defined by the Institute of Instrumentation and Control as follows: # A diagram which shows the interconnection of process equipment and the instrumentation used to control the process. In the process industry, a standard set of symbols is used to prepare drawings of processes. The instrument symbols used in these drawings are generally based on International Society of Automation (ISA) Standard S5. 1. # The primary schematic drawing used for laying out a process control installation. P&IDs play a significant role in the maintenance and modification of the process that it describes. It is critical to demonstrate the physical sequence of equipment and systems, as well as how these systems connect. During the design stage, the diagram also provides the basis for the development of system control schemes, allowing for further safety and operational investigations, such as a Hazard and operability study commonly pronounced as HAZOP. For processing facilities, it is a pictorial representation of *Key piping and instrument details *Control and shutdown schemes *Safety and regulatory requirements *Basic start up and operational information 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Piping and instrumentation diagram」の詳細全文を読む スポンサード リンク
|